On this page
Here’s a way of building sturdy supports for your driveway gates.
Level of difficulty
Level 2 – Intermediate
Things you’ll need
The steps to follow
- Determine the opening for your gate and decide on the style of the gate. Purchase the gates from your local DIY shop
- Wrap a string line around two pegs to stretch a line between the two pillars you plan to build
- Next you’ll need to lay a solid foundation to support the brick pillars.
- Bury the base of an L-shaped steel bar in the centre of the foundation where the brick pillar will be built. Make sure the base of the steel bar is completely buried in the concrete. This will further reinforce and stabilise the pillar
- Let the mortar fully set and dry for a day before laying your course of bricks
- Build the brick pillar around the steel bar. Fill the space between the steel bar and brick with concrete, as you continue building the pillar
Note: A standard size for brick pillars is about 1.5 bricks squared.
- After you’ve set out the measurements for your brick pillars and set the foundation, start making the mortar mixture
- For each course of brick you build, don’t forget to use a spirit level to make sure the bricks are level
- When you’ve reached your planned height, finish off by capping the pillars with stone slabs
- Applying a layer of mortar on the underside of the stone slab
- Place it at the top of the brick pillar
- Let the mortar dry and set before fitting the driveway gate
Don’t want to DIY? Get recommended bricklayers for your home improvement job.
Please note that all our DIY guides and ‘Expert answers’ advice have been written strictly for reference only. Rated People do not accept any liability for any damage caused to an individual, property or anything else as a result of following our DIY guides and using our ‘Expert answers’ advice.