We have 877 recommended Carpenters & Joiners near Radford and Park

Post your job - for free

Up to three tradesmen will contact you


14 customer reviews

Jobs
Ratings

What type of tradesman do you need?

What type of job is it?

What is the postcode for the job?

more thanOne Million Jobsposted

Telegraph guardian.co.uk Move or Improve? Homes & Property housetohome

Find a tradesman on the go

Download our app Tracking pixel

Reviews of Carpenters & Joiners in Radford and Park, Nottingham

Radford and Park, NG7

Under £250
make a simple wooden garden gate and posts which att\ach to a brick wall. current gate and posts rotten. Gate around 6 feet high & 4 feet wide.
We're much better than could have hoped for!

Radford and Park, NG7

Under £250
Fit 4 internal doors including handles. I will supply the doors.
Did a great job at a great price, friendly and helpfull. Highly recomended

Radford and Park, NG7

Under £250
to rehang a door and fit skirting boards
Very good job. Glyn is very helpful and polite. And does an excellent careful job. Would highly recommend him
G&W Joinery specialist & property maintenance services

Also specialises in handyman, traditional crafts, loft conversions and tiling.

Radford and Park, NG7

Under £100
I need an inch taking off an internal wooden door which no longer closes having had a new kitchen floor fitted. I also need a new hinge and latch adding to some french doors, which also stick. Finally, I need a groove cutting to insert intumescent strips into one fire door (I already have the strips).
Adam offered a prompt service, completed the job within budget and carried out additonal jobs over and above what he was asked to quote for at no extra cost. I would highly recommend him.
hughes joinery

Also specialises in plumbing, tiling, traditional crafts and flooring.

Radford and Park, NG7

Under £250
We need one interior door adjusting (probably by shaving the bottom?) so that it does not rub on a new carpet when it opens. The door is made from American white oak.
I would highly recommend this service based on our experience of punctuality, tidiness and attention to detail. The work was carried out in a personable manner and there was clearly knowledge and experiance in abundance.

Radford and Park, NG7

Under £250
Two step boxes; 1. 1500mm l x 300mm d x 440mm h 2. 1000mm l x 300mm d x 220mm. h Both with bull nose stair top in oak Both with open hole handles each end Both to lock together and to wall - simple hooks ok - just to stop seperating in use Both Filled with ballast for weight. Both protected base with felt so not damage floor tiles. Please use 22mm MDF for sides and 50 x 50 wood for internal frame. Paint sides white eggshell, top with advised protection.
Came on time, did as requested to good standard. Higher daily rate than others.
Valenders Carpentry

Also specialises in loft conversions, tiling, handyman and building.

Radford and Park, NG7

Under £1,000
Remove old work surfaces and fit new wooden surfaces. Cut out for sink and hob. Fit sink, tap and hob. The type of material used will be beechwood. I would like the tradesperson to come over and visit before they buy materials as I want to see if they'll be able to get a better deal on the materials bought.
Ash did a fantastic job in fitting the new wood worktops. Real attention to detail and professional at every level - from fitting and joining the tops to plumbing the new sink and tap in. Also cleaned up and was considerate of my newly decorated house! I would use again and recommend to friends.
Ashiswood

Also specialises in windows & conservatories, tiling, roofing and building.

Radford and Park, NG7

Under £1,000
Hi, Semi detached cottage style property in central Nottingham (NG7) area. 8 or 9 timber windows. 4 frames are not recessed and are suffering from wet rot to lower frame members. Rotten timber needs removing and replacing with new. Correct rot prevention needs to be applied and then all windows and 1 x storm porch need priming and painting as necessary. Many thanks.
Good value for money, quick and efficient. Would have preferred a tidier finish but given the price and pace am happy with the result.
T & G Building

Also specialises in heating, building, painting & decorating and locksmith.

Radford and Park, NG7

Under £250
Remove skirting board to hallway and lounge. Lay approx 22sqm of laminate flooring. Fix door bars and new skirting boards. Job to be done w/c 21st Feb. All materials on site,labour only.
Excellent job,very professional. Many thanks.
Bennett Ceramics

Also specialises in tiling, traditional crafts, flooring and bathrooms.

Radford and Park, NG7

I'm not sure
Need to fit 4 large bookshelves (140cm long & approximately 50lbs each) to a wall.
This person was aways on time and have done a really good job. Thanks
See more ratings See other carpenters & joiners

Previous carpentry jobs in Radford and Park, Nottingham

Radford and Park, NG7

Under £100
Hang and fit furnture to 4 internal doors

Radford and Park, NG7

Under £250
A hallway that needs levelling and oak wood fitting

Radford and Park, NG1

Under £500
3 window sills (one large, 2 small) in one bed flat. MDF sills which are now warping and need to be replaced.

Radford and Park, NG7

Under £100
Someone tried breaking in to my flat and the door has splinted and the lock is not working properly.

Radford and Park, NG7

Under £100
Fit an integrated washing machine, including fitting the door and kick board and plumbing in.

Radford and Park, NG1

Under £500
Unsold Job, Updated Details : Modification to existing building Original : We are an office based in Nottingham City Centre, we have a window on our top floor with a smashed pain of glass, the wooden frame has split and will need replacing.

Radford and Park, NG1

Under £4,000
External oak or oak veneer doors required for existing offices on 22a The Ropewalk

Radford and Park, NG7

Under £100
2x internal wooden doors require planing in order to close properly. 1x external door also needs work to open / close properly.

Radford and Park, NG7

Under £1,000
Joiner/handyman required to fit door handles and locks, skirtings, mdf panels, plinths, small area of tiling, small kitchen worktops, cabinet doors etc.

Radford and Park, NG1

Under £1,000
Updated : We would like a simple set of shelves built to fit into an alcove space. The dimensions are 200x150x30cm. Original : We would like a set of shelves built to fit into an alcove. Approx 200x150x30cm

News