We have 1806 recommended Heating Engineers near Southgate

Post your job - for free

Up to three tradesmen will contact you


6 customer reviews

Jobs
Ratings

What type of tradesman do you need?

What type of job is it?

What is the postcode for the job?

more thanOne Million Jobsposted

Telegraph guardian.co.uk Move or Improve? Homes & Property housetohome

Find a tradesman on the go

Download our app Tracking pixel

Reviews of Heating Engineers in Southgate, Enfield

Southgate, N14

Under £250
Updated : Should have said... - Gas board have capped off the supply at the meter and this would need reconnecting - old gas hob is still attached to the worktop Original : Fit a new gas hob and uninstall the old one.
Nice guy, nice price!! What more could you ask for...? Fully recommend.
L & T Heating Gas & Plumbing Services

Also specialises in plumbing.

Southgate, N21

Under £2,000
Current boiler completely broken, replacement needed.
Great tradesman. Dealt with the boiler replacement quickly and cleanly without any problems. Well recommended.
Adam Mceachern

Also specialises in plumbing.

Southgate, N14

Under £250
Only apply if you are Gas Safe registered and can provide registration number; and are able to register new boiler installation jobs. Only apply if you have a good history of 5* ratings. Appointments this evening only for work this week; do not apply if you cannot do an appointment this evening or cannot work this week. Boiler is a new Valliant model. Have been informed that may need some electric changes to pass gas safe test, so quote should include this.
We were very pleased with Christian. He had good availability to discuss a job, arrived on time, completed the job as requested and was very helpful. He gave a competitive quote. He is Gas Safe registered and the certificate arrived as needed. We would definitely use him again.
GDC Plumbing and Heating

Also specialises in specialist services, flooring and plumbing.

Southgate, N14

Under £100
I would like to promote a trusted (and registered) Gas Safety Certificates provider to my clients. Properties are predominantly based in North / North-West London, but we do cater for all of London (but these can be discussed / an exception).
Swift, profession response.

Southgate, N14

Under £250
Change diverter valve on Sime Format 80C. I could source the new valve so please quote for part and labour separately.
The diverter valve was changed at a competitive price and it works fine since then. A receipt for the parts was also given so I could see what the parts cost and how much the labour was. Thank you for a job well done. Walter
netplumb

Also specialises in plumbing.

Southgate, N14

Under £1,000
Straight swap to a wall hung but to a condensing boiler.
Good quality work at a reasonable price.
Adam Mceachern

Also specialises in plumbing.

See other heating engineers

Previous heating engineer jobs in Southgate, Enfield

Southgate, N14

Under £4,000
Unsold Job, Updated Details : new installation of boiler flueing/fitting plume kit ,condensate trace heater/connection/lagged fit /new controls pack to separate heating and hot wate relink pipework to gas supply to boiler and for water route to relink to instal new megaflow cylinder system /electrical work in bathroom for boiler require pump over-run/fused spur for megaflow cylinder and fitting surge pipe to outside of bathroom / power flushing/ brick up old balance flue hole to old boiler need combination of builder /plumber/electrician /fitting new pipe from mains supply to property to get minimum 22mm flow for megaflow cylinder Original : we need to get minimum 22 pressure from mains to house for megaflow cylinder to new boiler installation

Southgate, N14

Under £100
Basically I have just moved in to a house in southgate and can't get hot water out of the combi. I can get heating. I am sure it's something simple. How much will it cost kfor you to take a look? I live on oak wood park road

Southgate, N21

Under £2,000
I need a quote for a full installation and of a new combi-bolier. My existing one is extremely old, so presumably an entirely new system needs to be fitted. I have no heating and hot water (currently using immersion heater), so this works is urgent. Thank you Timing: ASAP

Southgate, N21

Under £250
Potterton puma 80 boiler Low pressure light on Pressure was below 1bar Raised pressure with tap but went too high (3.5bar) Drained rad and pressure is now 2 bar exactly Light still on Disconnected yellow cable to pressure switch and light goes off but water and heating still don't work - makes all the right sounds apart from the lighting flame noise. Reconnected yellow cable and light still on and heat and water still not working. Good luck! Timing: ASAP

Southgate, N14

Under £500
hot water but no central heating. Valliant boiler.

Southgate, N14

Under £100
Gas leak on internal pipework ,

Southgate, N21

Under £250
i have Vaillant combi and keep on getting error code F75. i have had the pump replaced plus the system power flushed and there are no visible signs of valve leakage, it occurs every couple of months after the system has been re-pressurised. i need to check further for what is causing the pressure drop, i.e whether the boiler is at fault or pipes/rads. thanks

Southgate, N21

Under £2,000
I would a quote to replace an existing boiler install a new combi boiler in my two bedroom flat. the boilers we are looking at installing is either the Vaillant ecoTEC Pro 24 or the ecoTEC Plus 837. We would also like to remove the existing water tank from the storage cupboard as a new combi means this is no longer needed. Our budget includes the price of purchasing the boiler.

Southgate, N14

Under £100
I need an engineer to service the electric central heating system in my flat and to provide a certificate to confirm that the heaters are in good working order. Please could I obtain a quote for this?

Southgate, N14

Under £100
Just moved into a new build with underfloor heating on the ground floor and first floor bathrooms together with radiators on the first and second floor. All supplied by a combi Vailllant boiler. I need the whole system balanced, timed and set correctly for our needs and explained how to control it. Easy, but you must know underfloor and conventional gas fired sysyems inside out.

News