Potterton Puma 80e has retired I suspect after 13 years of service. Hot water works if hot water dial turned down. locks out if turned up. central heating not working at all. Hard water has got to the old girl. Looking for a quote for straight replacement plus system flush.
Mark and Luke arrived on time, did a great job installing boiler, new bathroom rad and were done by 4 pm.Chris
hot water doesn't work without having the heating on
Robert offered an excellent service. He was able to start the work straight away in a professional and friendly manner. I would highly recommend Robert to any one with heating and gas problems.Aisha
I need a Gas Safe registered engineer to provide me with Gas Safety Certificate. The boiler appears to me to be in excellent condition but I am selling my flat and I have agreed to provide the buyer with the certificate.
Need to replace a thermister on a GlowWorm (Micron 50FF) boiler. I have the new part already.
I am based in SE19 (Crystal Palace).
Knowledgeable, professional, thorough, reliable, informative and friendly - everything you want in a trademan (and at a fair price)! Highly recommended....wouldn't hesitate to use again.anthony
Supply and replace a small radiator in living room (double panel with 2 layers of convector fins currently). I have a 2 year old Vaillant combi boiler.
I would highly recommend U&C - Aziz and his colleague did a very professional job and left everything clean and tidy. Gave me a good price on the job and everything went smoothly - I have already arranged for him to do some more work for me.Gemma
Our Combi Boiler water pressure is going too high when on and dropping too low when off. it needs a service and inspection/repair
I had a problem with my combi boiler. They quickly identified the problem and carried out the necessary work to get it up and running again. I was very happy with the prompt and reliable service provided by PLR Plumbing.Andrew
A loop on my underfloor heating has stopped working. I suspect a jammed valve in the manifold as the pressure indicator shows about 1 bar pressure but the pipes are not warming.
The manifold is made by Henco (I think) and is about 10 years old.
Given this may take some time to resolve, I would be interested in hourly rate charged, estimated time to resolve and expertise in UFH
If there are any other questions regarding the system, please let me know.
Many thanks in advance
Excellent service - simply told me how to get the system working over the phone without a call outMark
Looking for Gas Safe Registered Engineer to:
- Disconnect old gas hob on Sat 18 June
- Connect new integrated gas hob (Bosch Classixx PCP616B90E) on 27 or 28 June (after we have installed new kitchen)
Cliff is a great find - professional, responsive and reliable, he showed up on time and worked efficiently. He also took the time to explain what he was doing, how to keep safe in the home and he checked our fireplace. Would definitely seek his services again.Denise
I need someone to fit a boiler that i will buy. I know that the necessary 22 pipework is in place and that all the radiators, barr one, will also need thermostatic valves fitted. I will buy the boiler - I am thinking of something like the Worcester Bosch 24i junior (but would take advice and will buy from you or a colleague if you can offer the same price as I have found on-line) - and the valves, so it is just the work that I need someone to carry out. The price quoted on this job is for fitting only.
St Leonard's, SW16
Under £500
I have a six year old gas boiler, which is failing to consistently heat up water particularly in the shower. The water will be hot, but will have prolonged periods when it will turn cold, before turning back to hot.
The boiler has not been serviced since it was installed, but there has been this same intermittent problem for a couple of years. I do not have information on the type of boiler and model, but can obtained this.
I am looking for someone to review what the cause of the problem is and possible repair.
I would prefer to be contacted by email and can call back using skype if you provide a number. I will have limited access today (13 March), but readily available for the next few days.
St Leonard's, SW16
Under £100
kenwood gas rangestyle cooker, only 4 months out of warranty, had the gas on, tried turning it off and the knob became stiff, tried harder and the knob broke off, turned gas off from the mains but need cooker back up and running???
St Leonard's, SW16
Under £250
I need a mid switch valve fitting as well as an ignition for a gas fire - I have both parts - not sure if same person can do both jobs but assume so?
Gipsy Hill, SE27
Under £2,000
we need a new combi boiler and need it installed.
St Leonard's, SW16
Under £100
No heating or hot water .. boiler not able to turn on, but able to use cooker
Gipsy Hill, SE21
Under £100
Updated : Work to be done on Monday 8th October if possible, ideally in the morning. Original : Worcester 24CDi boiler has lost all pressure. Other gas appliances are working and boiler was only serviced this year & was fine. The key is in the bottom still (I couldn't easily remove) it. I think that it is very much a quick job that may be as much showing me where I have been stupid!
St Leonard's, SW16
Under £100
Boiler to working- Refuses to switch on
Thurlow Park, SE21
Under £100
I have a combi boiler which is not giving any hot water or heating the radiators. Would like someone to come out on Thursday 12 April after 6.30pm.
St Leonard's, SW16
Under £100
I would like a quote for a boiler service and also to see if I can improve the heating/radiator in the front bedroom (large curved bay with radiator on wrong wall) as really suffering from condensation.