Reviews of Heating Engineers in Malvern, Worcestershire
29 April 2013
Particularly interested in Atag Q51C storage combi or unvented DHW cylinder
Richard did a great job replacing our boiler and moving a radiator. The work was neat and tidy and the boiler has been much better than our old one. His price was also the best by far. Would definitely use again.Chris
Once job started Clive worked very hard and thoroughly. We discussed the job at various stages and he carried out all my requests. He also did some extra work at short notice. All of his work seems to have been carried out to a very high standard and good value for money. I would have no hesitation in recommending him.will
Previous heating engineer jobs in Malvern, Worcestershire
Disconnect gas cooker and connect new cooker
Service to mains gas combi boiler
need duel fuel cooker installation.
no indicator lights, so no flame or heating
An annual Gas Certificate is required
Remove Storeage Heater system and install suitable Oil Fired including tank and boiler.
11 gas heaters/radiators to be disconnected and removed. Some 'gas fires, some wall radiators.
gas supplies to be sealed off.
1 gas cooker to be disconnected.
Installation of a gas cooker in a ground floor flat in malvern
I am having difficulty with the above programmer: although it used to be possible to separate the hot water and heating controls, as per the instruction manual, when I now put what I think is just the hot water on, all the radiators also kick into action as well. This, even with making sure the programmer says "Off" for the central heating, and the Danfoss room thermostat is turned down, and even setting the programmer to bring on no heating at all (i.e. start 5 am, stop 5 am, start 12.00 hrs, stop 12.00 hrs etc). Danfoss say that there should be a motorised valve between the boiler and the radiator circuit which should shut off when there is no heating demand and that this valve is almost certainly defective. They have sent me wiring diagrams, so I now need someone to investigate and put things right.
Remove old central heating boiler and fit new combi boiler to system.
Take gas connection into the lounge for new fire.