We are interested in replacing an L-shaped kitchen in an 8m2 room with a traditional style kitchen with integrated appliances and a wood worktop. All appliances are already in place. There are no changes to plumbing or electricals required.
We would be keen to have the new kitchen fitted as soon as possible.
Paul did a great job of installing our new kitchen. He was very patient with my indecisiveness and helped me to make the right choices. He often went above and beyond to make sure I ended up with the kitchen I had in mind. The quality of the finish is very good.Sherine
Ivan, did an excellent job fitting work tops and a kitchen unit in my house in Wimbledon. Ivan was very reliable and was very professional. I would definitely recommend Ivan and will use him on future projects.Ben
Installation of kitchen and 2 bathrooms in 4th floor flat incl tiling and flooring. Will need to remove old kitchen and appliances and old bathrooms. Sizes of rooms are fairly typical for a flat, so pretty compact.
From what I can tell, it's all fairly standard stuff.
Bathrooms have a waste flow running along the back which is boxed in so presume this will need redoing, and shower in one of the bathrooms may need a platform so it can go 'over' the waste flow.
Bathrooms are to be tiled full height and floor tiles too.
Kitchen has some tiling and new flooring (also tiles).
Kitchen and bathroom units, accessories, tiles ordered with bathrooms already delivered. You would need to supply things like grouting, adhesive etc.
I have been very impressed with Rhino Refurbs from the start. Vincent is skilled, professional, reliable and polite - and completed everything at a very competitive price. He takes great pride in the quality of his work and this shows in the quality of the installations of kitchen and bathrooms he did for me and the quality of the finish in the decorating he also did.
I would have no hesitation in recommending Rhino Refurbs - I intend to work with them again when possible.Yasser
The kitchen is located on the 1st floor of a Victorian house - roughly 100-120sq foot. range, dishwasher and washing machine already in the kitchen but will need to put in a new fridge. The flooring will also need to be laid. most likely will be laminate.
Bill contacted me shortly after i placed the job on Rated People, we discussed the work that needed doing and he made suggestions that ended up saving me nearly £2000. Bill looked after the whole project from disposing of the old kitchen to ordering and fitting the new one, laying the floor and doing the tiling. All was done on time and to spec. In addition to this, i had some carpentry work that needed doing. with out any fuss or trouble Bill measured up and came back on the agreed day to fit. no task was too much trouble for him, I was very impressed with Bill's service and wouldnt hesitate to use him again for any job.Sean
fit one sink and taps, Fit door to washing machine,attach one kick board and alcove,
Hi there, I would like to have a new kitchen installed in my flat in a ex-council building, built in the the 60's, situated in Wimbledon. The size of the kitchen is about 270cm x 68cm, with a small storage cupboard at the end.
I was considering providing the units, gas stove, fan oven, sink,floor, tiles, paint, light fittings etc. However I would require some input and advice from you regarding the stove and oven.
The kind of work I require is the disposing of the the existing kitchen and recycling/dumping of all the contents (including floor tiles, a very old extraction fan, I can arrange for the freezer, fridge and gas oven to be recylced).
Then installation of the entire kitchen, tiling the floor, re-plastering of the ceiling and walls (if needed). I would also like to replace the kitchen door and the door on the small storage cupboard.
Depending on your recommendations, there might be additional gas and water pipe work (although, I wouldn't expect this to be a huge amount of work).
I have budget of around £5K.
New kitchen with high end appliances
, bespoke design under 35k
I have the new work top in storage one side has a sink that i would like repalced ( i have the new sinks ) one has a gas hod that i would like replaced ( i have the hob ) i would roughlt say it is 5 mterers either way
Oven, fridge, gas hob, extractor fan. Everything but the boiler and washing machine.
Small u shaped kitchen (approx 2.62 metres by 2.4m by 3.4 m). Current kitchen is very dated but in reasonable condition (not sure what's under false ceiling though). Plus, the plumbing under the floor could do with a check for leaks. Brick work is showing where I had a new boiler fitted.
Counter with under counter shelving and wine racks. Two corner units (tall), one or two tall units, box in boiler, four normal size units.
I'm not sure
extend existing kitchen into utility area -means removal of french doors and minor changes and making good to doorframe then installing cupboards, worktop and breakfast bar
need a design only as will supply our own kitchen
I'm not sure
I have a very small kitchen but it's looking tattu. I would like to have cupboards and/or cupboard doors replaced, possibly worktops and possibly have the hob replaced (currently old electric, to replace with gas.)
The flat is rented out so ideally the work should be done when I am turning my tenants. I expect this would be August or September, but ideally I'd like to plan exactly what needs doing to get the timing right.
I can send photos to give an idea of the current state and size of the kitchen.
I don't need new appliances.
Make and fit part assembled units, plumbing and fitting kitchen sink, worktop, extrator fan ducted out.
Kitchen of 3x3 m needs refurbishment. Ceiling needs plastering and a window has to be removed.
Installation of 17 units, worktop, sink, gas kitchen, oven and cook hood.
Fit tiles on the wall between base and wall units and any other bare wall will have to be painted.
Finally some electric sockets will have to be moved some inches from their current location.