Install base units, wall units, sink / taps, gas hob, gas oven, extractor hood, dishwasher, washing machine Type of worktop: laminate worktop Other services required: painting and decorating, wall tiling Kitchen size: medium I'd like the tradesman to supply the kitchen Additional information: need someone to help me with design and fit of a new kitchen.the actual kitchen needs to be removed and dispose of.I d like the tradesman to look after it as I'm unable to walk/drive long distances.thank you,Amanda
Stanmore Park, HA7
Install base units, wall units, sink / taps, electric hob, electric oven, extractor hood Type of worktop: laminate worktop Other services required: install electrical sockets Kitchen size: small I will supply the kitchen Additional information: to fit new kitchen into warden controlled bedsit. old kitchen removed. to build purchased cabinets and install. to fit neww sockets. to fit integrated cooker and hob, new sink and tap and extractor. may require splash back. fit worktop. must have electical certification and proof of indemity insurance up to 2 million pounds for housing association
Install base units, wall units, sink / taps, gas hob, electric oven, extractor hood, fridge, freezer, dishwasher Type of worktop: marble worktop Kitchen size: large I will supply the kitchen Additional information: I need a kitchen fitted next week (w/c 16/12) fit kitchen furniture and appliances, connect to gas pipes and plumbing work that builders have put into position ready. Solid units (not flat pack) kitchen already on site. Integrated appliances. Ceasarstone tops will be templated and fitted by fabricator. No island
Unsold lead, updated details: 5m X 2M
No tiles to be fitted only kitchen unit and appliances Original: Install base units, wall units, sink / taps, gas hob, gas oven, electric hob, electric oven, fridge, freezer, dishwasher, washing machine
Type of worktop: granite worktop
Other services required: install electrical sockets
Kitchen size: large
I will supply the kitchen
Additional information: Please contact me for further information
Installation of new Ikea kitchen. 12 units, 6 appliances (inc gass hob), sink & taps and wood work surface. New vinyl flooring to be laid (12sqm) change radiator, tilling (2sqm) and install regulation 17 fuse board.
Customer owns and lives at this property
Stanmore Park, HA7
Looking for a competative labour rate of around £100 per day to undertake a complete refurbishment. I will buy and pay for material myself. Customer owns and lives at this property
Unsold Job, Updated Details : An old extractor fan needs to be removed from the kitchen and be replaced by a new one.We estimate that the cost of purchasing a new extractor and work done will be in the region of £500. Original : to remove an old extractor fan and install a new one in the kitchen.
I am interested in replacing my kitchen cabinet doors and work top and splash back
Dated kitchen. Needs complete refurbishment with design plan. We are attempting to source our own units. Will need tiling (wall and floor) as well as check of electrics. Kitchen style is a long galley. Approximately 3-4 metres long
Stanmore Park, HA7
I need a work top to be replaced, the gas unit needs to be disconnected and refitted. The Sink needs to be removed and fitted, there is going to be plumbing and electrical involved as well due to us having insinkerator in our kitchen. I also have two kitchen cabinet Doors that need to be replaced, and Dust Bin to be fitted on one of the doors. Another door is a Dish Washer door that needs to be fitted. Gas pipe might need to be removed and connected, for that I will need a gas registered person, doing that. The work will Involve, Electrics, Plumbing and gas registered person. when doing the work i would need the Silicone to be done for the worktop properly to ensure no leakages, Gas Hob with 6 gas burner and a sink of 1.5 with an insikerator to be installed and the Job needs to be done correctly and correct use of silicone on the gas hob, Sink and when fitting the dish washer door there will need to put a plastic that stops the steam going to work top and cabinet. When fitting this work, i would require a guarantee for the work that is carried out in writing incase there is a leak or incase the worktop was not fitted properly or there is some water escaping from Dishwasher door, sink or insinkerator.
I am not aware of the pricing as to how much the work is going to cost, for this reason i am going to choose 500 pounds as i dont know the real cost. if you have any questions please give me a call