We want our current loft extension to be brought up to current regs. we currently have a space saver staircase but no dormer but would probably need a dormer put in to create the space for a regular staircase
Timing: I am flexible on start date
I am having new loft insulation fitted this week and will need the joists raising and the loft boarded over. It is a bungalow and as there is already a room in the roof the loft space runs around two sides of this room, so it is not a whole loft. I need a proper job done as I do need to use the loft space for storage.
Tolworth and Hook Rise, KT6
wooden stairecase to converted loft
We have a 1930's terraced house and want a quotation to extend into the loft providing a 4th bedroom with an en suite shower room, staircase and services etc. The quotation should cover works to building regulations standards and party wall provisions etc. We would like to see examples of previous work. We are looking to begin work on this project early in the new year. Many thanks.
Long Ditton, KT7
Rear dormer loft conversion with ensuite
Bensham Manor, CR7
loft conversion and side return extension in cr7
Mount Hermon West, GU22
Insulate & board loft.
Install loft ladder.
Upper Norwood, CR7
I would like a quote for complete renovation of a 5 bed property as well as installation of a loft conversion. I have plans drawn up and am able to email the plans on request.
Horsell East and Woodham, GU21
Large roof conversion - planning approved. Hip to Gable on two sides and two dormers creating two bedrooms/bathroomon top floor.
Goldsworth East, GU21
The external wall should be tied in to the structure at ceiling / floor level. Options include the fitting of pre-drilled and galvanised metal straps at 1.2mtrs centres, the straps requiring mechanical fixing to the external wall and should be screwed to the side, top or bottom of the internal floor / ceiling joist timbers. If there are window or door openings, two straps should be fitted either side of the opening to make up for any missing straps. Alternatively the installation of drilled in-situ stainless steel mechanical fixings could be considered. In this instance, straps will be required up either side of the apex and the drilled in situ mechanical fixings installed at 600mm centres through the first floor ceiling joists. Care should be given to ensure the loft space is braced so as not create any distortions within the structure.