Unsold lead, updated details: Three small wrought iron gates that need stripping and repainting. Original: There are 2 double gates - 160m x 90m and 1 side gate - 95m x 90m. They are wrought iron with a swirling pattern. All need stripping back to the iron and then priming and repainting.
Gordon was quick and did exactly what he promised. Would recommend him to anyone.
We bought the house in January. Recently we realised the garage roof (part is not easily visible) was coveredwith plastic sheeting which tore and came off in high winds. On inspection we realised that although the visible part was properly roofed the rest was just wood. We need this part covering.
Unsold lead, updated details: Not sure of costs so open to discussion. Original: Replace asbestos corrugated roof on 2 blocks of garages. Each block contains 5 single storey garages ajoining each other. Replacement sheet needs to be durable e.g. Aluminium section.
Knutsford Norbury Booths, WA16
Unsold lead, updated details: Need a secure chain link fence topped off with barbed wire of 1.5m high and 25 m long installed on to our boundary running parrel to a existing holly hedge which joins a field. Would also like the base of the fence ideally to run below ground, 300mm deep, to stop rabbits getting in. Easy access is available from the field as the farmers access route passes the boundary in question Timing: Within 2 we Original: Need a secure chain link fence topped off with razor wire of 1.5m high and 25 m long installed on to our boundary which joins a field. It will reinforce the protecion provided by the existing holly hedge fence. Would also like the base of the fence to be below ground in a trench of some 300mm deep to stop rabbits getting in. Easy access is available from the field as the farmers access route passes the boundary in question Timing: Within 2 weeks
Want a tall rack for firewood; approx 32cm wide x 45 cm deep x 120 cm high, three shelves.
Knutsford Over, WA16
gates to fit driveway 3490mm with limited space
Sale Moor, M33
The entrance to the driveway was extended and existing gates don't fit, so we need:
Either existing gates with an extension, or
The entrance is 16ft, 4inches
metal railings and side gate need to be fabricated in wrought iron