New Installation:
copper roof for octagonal summer house.
curving inwards and upwards from walls in matching octagonal shape. Each side of roof made from one piece of copper thinning to about 4" at the top from 35" at the bottom. The eaves also in copper, 3" deep slightly set back from the bottom of the roof pieces, but fixed to the roof pieces.
copper ball finial on copper base.
Raised ridge between sheets also in copper.
About 5' from bottom of a ridge to its top and about 10" maximum inward distance from that line to the ridge.
Timing: Within 2 months
Redvales, BL9
Under £250
We require a new front gate and fencing around the small front wall
Timing: Within 2 weeks
Altham, BB5
Under £4,000
Iron fence to be built in garden.
Clayton Le Woods West and Cuerden, PR25
Under £100
Fit two gates to metal pillars to make stable.
Lowerhouse, PR25
Under £250
Have a wrought iron gate at the end of my drive in a bad state of repair. Need it cleaning and free from rust before painting.
Ribbleton, PR2
Under £100
need a price for metal gates, post already in place gates and brackets only, gates are for the driveway its about 8 feet ( total guess) need one side of the gates 5 feet other side 3 feet, you will see why when you look at the job.
I know it will cost more than I put down its to keep your purchase price low
Douglas, WN6
Under £8,000
Would like an automated gate supplied/fabricated and installed at our factory premises.
Orrell, WN5
Under £1,000
We need to gate off the back garden but it would have to link between house wall and fence we think. Then we also need a gate between the front garden wall and fencing to the side of our driveway. Possibly another gate between garage and garden in the back also.