I have an end terrace house from 1904 with damp problems in solid brickwork (no cavity) gable wall, probably rising damp. Need a new chemical DPC to full gable and possibly to bay window at front.
Timing: I am flexible on start date
Our ground floor terraced flat has a damp course fitted and had remedial works carried out prior to our purchasing it but our tenants are complaint of dam in the back bedroom, kitchen, bathroom and built in cupboard between the kitchen and bathroom.
These areas are all at the back of the flat facing onto the exposed back yard so part of the problem may be condensation.
We are looking for someone to carry out an assessment of the entire 2 bedroom flat and carry out any remedial work required.
The flat is managed by an agent so access would have to be arranged through them.
Need scaffold for new roof. Front back and side of a standard two storey semi detached house
Some internal roof timbers show signs of woodworm infestation. I need to know whether this is live and whether the timbers can be preserved
Possible rising dampin bedroom wall
East Gosforth, NE2
Updated : Fireplace needs relining / repair /
/ replacement Original : Resotore / replace Edwardian fireplace to make wood / smokeless fuel burning fire. Need to retain original mantlepiece
We have dampness in the kitchen external wall and need a survey and estimate to eradicate it.
East Gosforth, NE3
I have a downstairs Tyneside style flat and the front bedroom has wet walls inside and outside. I am unsure if it is from the guttering upstairs or if l have rising damp.
Forest Hall, NE12
I need to have a fireplace fitted along with a gas fire
The gas fire will be either a Kinder Distinction/DaVinci fire or Faber Clear.
The surround will be Limestone (Hearth Slips etc)
I am working to get the surround manufactured and the fire supplied, if you have any connections for stone masonary/gas fire supply and could quote for whole job that would be useful.
The old fire has been removed and the builders opening has been cleared. The chimney is a standard chimney and will need a balance flue chimney conversion kit, supplied by the fire manufacturer, installed.
The budget I have quoted is for complete job, supply fit etc.