I want to use a corner cupboard space next to the sink to fit a dishwasher. I need advice on size of dishwasher to use for the space available and a costing to prepare the cupboard space, take off door and plumb in, fit etc
We have a kitchen that needs fitting and real wood work tops that need cutting and fitting no electrical work or plumbing it is purely just fitting the units to the walls top and base and the worktops and end pannels and kickboards
We need someone to do our whole kitchen. This will involve putting down new flooring, taking out old kitchen, and installing new ikea kitchen and any painting/finishing off jobs. No worktop installation needed as the people supplying will fit it.
Hi, I have most of my kitchen already fitted but I want somebody who has the knowledge to finish the final buts, such as the inbuilt fridge/freezer and the dishwasher door. Also adjust some of the doors so that the job is finished.
I'm getting a kitchen from howdens 1st October deliver to the house and need it fitted, cabinets and worktop. also some pipe work needs moving ideally by yourself. I want to get it done for around 1500 please come and have a look and quote I have plans from howdens
My kitchen extension is partially finished, it requires measuring up and installation of units and appliances plumbed in, with possibly some other finishing. Just for context my partner, who was a builder, had done most of the work but then sadly received a terminal diagnosis and was unable to finish the work.
the kitchen is badly organised with a cooker next to the sink. we will purchase a new gas cooker which will need fitting meaning some cupboards will need replacing.
if it is not possible to remodel then we may buy all new, we will discuss this with the fitter.
the budget below is flexible
I am looking for a quote for someone to fit a double wall unit in our kitchen. Approx 800mm wide. We have ordered the unit which will come assembled, so just need it fitted and whatever materials are needed to do the job
Small kitchen refurbishment. I have a small kitchen (2x2.6m) with need to be refurbished. I want a fitted kitchen and tiled floor. I haven’t chosen the design yet as I’m still having quote done from different shops. If you have a kitchen provider which you usually use that’s fine by me.
Kitchen area roughly 4x4.
Move radiator within kitchen.
Extend a gas line from old cooker position ready for new island hob fitting.
New ply on floor ready for tiling.
Make walls right for tiling either skim or reboard which ever is more cost friendly.
Board and skim ceiling with downlighters. Paint finish.
Install new fitted kitchen including the repositioning/plumbing of washer and dishwasher. Staying in same line just a move in position but existing plumb fittings to be renewed.
Kitchen design consists of 3 larder, 1 corner, 4 high cupboards, 6 undercounter cupboards, island with gas hob.
Move existing sockets to suit kitchen design.
Install (expected) 4 new double sockets to provide additional.
Open what is a currently a window through to a sunroom so it's open plan to the kitchen. Passage to remain the same as existing framework that's in place for window.
Tile floor approx 14 sqm2.
Tile Walls approx 18 sqm2.
Fit new skirting and facings..
remove partition wall between small enclosed kitchen to the lounge / diner to open it up, will involve the resiting of existing radiator in the kitchen.
plumbing and electrical works, fit and instal replacement kitchen ( already purchased) cabinets and worktop.
fit replacement radiator
Looking to replace a single piece of oak worktop approx 246cm x 62cm. The work required is to remove existing damaged worktop and silicone, install new worktop including cutting sink and tap holes and apply oil and silicone.
We are looking to strip out the existing kitchen and install a new kitchen that has been designed and will come flat pack. We wish to have fitted a splash back panel.
I will do the majority of the strip out myself and will assist in the new install.
i need sink unit moving. i need a new sink and tap (need to buy ) fitting
i need a 600m dishwasher integrated (need to buy) fittiing ( i have existing front for dishwasher.
not sure if i can use existing granite if not i need a new worktop as well.
I've designed and bought my kitchen (already delivered) and I'm looking for someone with experience in fitting kitchens. There is an island, a u-shaped run of units, some tall units and some wall hung units (approx 30 in total). Install onto newly tiled floor. I have created full design drawings and have other trades onsite to assist.
I need 3 marble effect LAMINATE worktops fitted on top of new units, i fitted the kitchen myself so the units are lasered in for level. One end has a curved end on it which Ive had machined off site so is just a case of doing the 2 joints, the cut out for the sink and hob and cut them to length. Worktops are being delivered monday 25th so asap after that to be done
We'd like a quote on fitting a pre-built Howden's kitchen asap please :) I'll also need a carpenter to do further work on the house and on other property in the future. Please get in touch if you can help.
I require a vented cooker hood supplied and installing in my kitchen.
I would need a recommenation of hood for the set up in the kitchen.
Removal of existing non working hood.
The hood will be fitted around 20cm from the combi boiler. The vent ducting would need to run left to the wall avoiding the combi boilers duct.
Power will need to hook up to power supply for the boiler.
All power cables will need to be covered/hidden and ducting boxed in/hidden.