A party garden wall, exposed on one side to the garden and an internal wall on the other side with a lightweight corrugated clear roof creating a passageway to the garden.
The wall on the garden side has eroded considerably and has caused a crack and damp to seep into the internal side of the wall.
We would like it levelled off and made stable, build back up with 9” concrete blocks, take off render on internal wall side to be tanked with slurry stonework before re-scratch coating and top coating wall. Likewise on the garden side.
Cut new lead flashing in above existing corrugated clear roof and place lead dressed down either side of the wall at the top before capping it off with coping Stones.
Gabion wall with attractive stone
To be built inside a shed at Melton Mowbray cattle market. This is the basis for our bar to take timber bar top.
Wall to be 5.5m long x 1.05 - 1.10m high x 40 or 50cm deep.
Need built in Mid October. Once floor & resin cured.
Simple job - 12 seat tops (outdoor type) to fix down to concrete bases. Each has 6No M8 resin fixings. so its simply drill a m10 hole at 70mm and resin fix then tighten.
Each takes about 20 minutes total.
CSCS operative card required and full PPE required on site
You will need to do a site induction in advance of the work