AH Electrical Services

53 ratings
Share this page

About AH Electrical Services

I am young, enthusiastic and run an honest and friendly service. I work to 17th edition and part P building regulations. I'm thorough in my work and safety is paramount throughout. I can issue certificates where necessary and I am part P registered with Stroma and certify and notify all necessary work.

Ratings & reviews

AH Electrical Services rated for Electrician in Manchester

5

Overall rating

53 total ratings 1 last 30 days 18 last 6 months 37 last 12 months

30 Jul 2018

Electrician

Very professional I would have no problem recommending

, SK15

07 Jun 2018

Electrician

Very friendly guys. Turned up on time and completed quickly (even with unexpected work to do)

, SK2

16 May 2018

Electrician

Small electrical job, disconnecting an old external garage's power supply. Took about 30mins and charged £90. Polite, efficient, clean. Would recommend.

, SK8

13 May 2018

Electrician

Good, friendly guys. They came to do a job when it suited me and investigated some lingering questions marks about my lighting as well. Thanks a lot!

, M4

09 May 2018

Electrician

he is fast, accurate and friendly.

, M20

05 May 2018

Electrician

Professional and well mannered. Ensured job was completed to high standard! Will defintately use Adam again.

, WA5

05 May 2018

Electrician

Fantastic service, turned up within minutes, and traced and fixed the problem quickly. Would highly recommend.

, M4

29 Apr 2018

Electrician

Brilliant first experience with Rated People. Adam sorted everything in no time at all and talked me through everything he was doing. Would recommend to anyone else without hesitation.

, M45

05 Apr 2018

Electrician

I needed an urgent call out and Adam picked up job straight away and rang, said a time and was here as agreed. He dealt with the problem and was helpful explaining what had gone wrong.

, M20

14 May 2018

Electrician

Did what they said and turned up on a bank holiday to complete the work as we needed it urgently. Would use again.

, M30

Ask an expert

AH Electrical Services answered questions about Electrician in Manchester

Sheila Newton's question
Mon 14 May 2018 10:56am
After an extractor fan was fitted in my bathroom I found my landing/bathroom lights were going on and off and flickering. I got one of Rated People to come along who, after I explained the problem by text, told me it would cost £150. He also changed a fuse in a lamp that wasn't working. I've now been told by a builder doing plastering in my bathroom that just a screw needed tightening. Can I make a complaint against him to Rated People please as that seems to be rather exorbitant? Thank you!
  • Adam Haddad's Answer
    Mon 14 May 2018 21:03pm
    Hi Sheila, I am a fully qualified electrician and I can only apologise for what has happened, I understand that you must be very upset in thinking you have been taken advantage of, have you spoken with the electrician to see if you can resolve the issue, also, I cannot comment on the work that was done but, a plasterer isn’t an electrician and shouldn’t really be commenting on what work was carried out unless he was there. Different electricians have different rates. If the work was only tightening a screw, it may have taken him a while to find the fault and also, you pay for their experience. He may have been very fast and experienced, some people take hours to find basic faults and experienced electricians can take minutes. Electricians should be paid for their experience and professionalism. I am sorry you feel let down by a fellow electrician and I hope my reply has cleared up a few issues your had.
Mark Eastwood's question
Tue 1 May 2018 12:46pm
I have a loop in lighting circuit and need to add a new external lantern. The nearest light I was hoping to take a feed from is located in the garage however it not the end of the circuit as it already has a power out feed connected to the neutral and loop terminals. My question is can I just take/is it safe to take a new feed for my new light off this ceiling rose? It would mean having two cores into 1 terminal on both loop and neutral. If thats not the best way then what is? ? The second part refers to the lamp itself - its an old vintage latern style with no ceiling rose and just L, N & E cables. Whats the best way of wiring the feed and switch cables into this please? I appreciate the risks involved but am keen to learn the correct way of doing things.
  • Adam Haddad's Answer
    Thu 3 May 2018 12:20pm
    Hi Mark, it’s perfectly fine to take another feed from the nearest rose or junction box, however there are some tests you should do before feeding another light from a circuit. 1. Perform an insulation resistance test on the lighting circuit your wish to add to. This will show you whether the current cables are in a good enough condition to withstand the extra load. Above 2M ohms is the legal limit but if it comes close to this, I wouldn’t make any alterations and rewire the whole circuit. 2. Perform an earth fault loop impedance test on the last point of the circuit, this will ensure you have earth continuity throughout, the reading will show you whether the impedance is within the limit to allow the MCB to trip within the tolerated time. If it is too high you cannot add any more lights to this circuit and should think about adding an RCD or and RCBO to the circuit for fault and additional protection. In order for you to alter any circuit you MUST have RCD protection for that circuit. If you don’t have a RCD for that circuit you could install an RCBO for that one particular circuit, that would act as an RCD and an MCB at the same time. If all of the above is ok, then if I was doing the job with the light fitting you mentioned I would take a 1.5mm cable from the nearest ceiling rose or junction box, I would take it down to the switch, then take a 1.5mm cable to the ceiling light. In the back of the switch back box you would need to join the two neutrals(blue) together and the CPC(earth) I would connect the live(brown) feed in to the common and the the live out to the light into L1. In the light fitting the cables are installed as per the fitting connections. Perform insulation resistance and Zs tests at your light fitting and the last point on your circuit after completion. Run tests on your rcd or RCBO to check if it is operational and within the limits. This work does require a minor works certificate. Please feel free to ask any questions. If you aren’t competent or have the equipment to do the above then I would employ a registered and competent electrician.

Trade certifications

Click logos to see more details

Part P Certifications

This tradesperson is Park P registered and their work meets legal safety standards.
Find out more about Part P

Registered Name
adam haddad
Registered Body:
ELECSA
Reg No:
STRI14878
adam haddad
ELECSA
STRI14878
Registered Name
Adam Haddad
Registered Body:
ELECSA
Reg No:
14878
Adam Haddad
ELECSA
14878

Areas serviced

Services available

Top trades offered by AH Electrical Services

Electrician

Internal lighting

Electrical installation / Testing

External lighting

Security systems / Alarms

CCTV installation

Fire alarm installation

CCTV / Satellites / Alarms

CCTV installation

Fire alarm installation