Hi, I think you need to post your job on the main web page! In the locksmith/carpentry section, and up to three Ratedpeople members will Quote you for this job. Also Ratedpeople.com will send you their Rating's and details for you to make your no obligation choice. Regards Sam
Hello Lisa, You can fit these yourself. You just need to drill a 16mm hole in the vertical rail (stile) of your door. If there is a good gap of say 4mm between the door edge and frame you could get away with chopping in the locks face plate. All that is left is to mark where you want the hole for the star key to go and drill a 9mm hole through to the main hole but not all the way. I hope this is what you wanted.
Nick shares his story of finding local tradespeople in his new area.
