Nish Maroo
I shall help you but in case you can not do it or have problem in starting the job, please call a local decorator or just place an advert on Rated People website for free. Below is the step by step to do the work: Step 1: To cut the required lengths. Measure the drop from the ceiling or coving to the floor allowing approximately 50 mm or 2 inch at both ends for trimming. Step 2: To apply the paste. Apply the paste liberally, brushing outwards to evenly dispense the paste. A roller can be used to give an even distribution. Step 3: Hang the wallpaper. Once you have hung a length of wallpaper: Step 4: Let the paste soak. Leave the paste to soak following the instructions on the wallpaper label. Step 5: Trim the excess paper. Trim the ends as soon as you have hung each strip. Do this by running the back of your scissors along the edge of the wallpaper; this will leave a visible crease on the front and back of the wallpaper, cut along this crease and brush back into place for a perfect finish. Step 6: Remove excess paste from paper. Remove excess paste with a damp sponge immediately. To apply the next length repeat the process making sure to match the paper. I hope you shall follow the above instructions. Cheers, Mr. Nish Maroo
